فقدان زيوت التشحيم بالتبخر وفقًا لطريقة نواك ASTM D5800
العلامة التجارية KN
المنتج المصدر داليان، الصين
التسليم في الوقت المحدد التسليم فور استلام الدفعة
القدرة على التوريد 30 مجموعة في شهر واحد
يُعدّ فقدان الزيت بالتبخر ذا أهمية خاصة في تزييت المحركات. فعند ارتفاع درجات الحرارة، قد يتبخر جزء من الزيت.
قد يُساهم التبخر في زيادة استهلاك الزيت في المحرك، وقد يؤدي إلى تغيير في خصائص الزيت. ويحدد العديد من مصنعي المحركات حدًا أقصى مسموحًا به.
فقدان التبخر. بعض مصنعي المحركات، عند تحديد الحد الأقصى
فيما يتعلق بفقدان التبخر المسموح به، يرجى ذكر طريقة الاختبار هذه بالإضافة إلى المواصفات.
KN-5800Z Automatic Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test)
Overview
KN-5800Z Automatic Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test) conforms to ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method, Procedure B uses the automated non-Woods metal Noack evaporative apparatus. The evaporation loss is of particular importance in engine lubrication. Where high temperatures occur, portions of an oil can evaporate. , which is suitable for the determination of lubricating oil (especially Evaporation loss of engine oil) and lubricating base oil at 250 ℃.
Main Technical Features
1. Metal bath heating device, safe and environmentally friendly.
2. Imported differential pressure gauge to ensure accurate pressure.
3. Woods alloy is added to the bath body for better heat transfer.
4. Equipped with special vacuum suction system.
5. Digital timer to record test time.
6. The evaporation crucible meets ASTM standards.
7. Precision pressure regulation system and imported needle valve to ensure accurate flow regulation.
8. There is a gas buffer bottle inside.
9. High-power solid state relay control heater.
10. Imported temperature control gauge for precise control.
11. Be able to get the dedicated balance data from the data processing system, with printing function
Technical Parameters
Working power supply | AC (220±10%) V, 50Hz(customizable) |
Temperature control mode | Digital display PID temperature control |
Temperature control range | Normal temperature to 250 °C ± 0.1 ° |
Heating method | Metal bath heating |
Pressure regulation | Highly precise needle valve |
Suction method | Vacuum pump |
Differential pressure measurement | Differential pressure measurement |
Applicable test standard | ASTM D5800,procedure B |








